Back to OMNI Mold Home









All OMNI Mold Systems products are proudly made in the U.S.A.

 

  Site Map

About OMNI Mold Systems

Frequently Asked Questions

Cam Action Molds

 • 812CS / 30
 • 1012CS / 40
 • 1012CS / 50
 • 1315CS / 60
 • 1218CS / 50
 • 1520CS / 50 & 60
 • Uni-Slide Series

Slide Assemblies

Versa Slide (Micro)
Versa Slide (SL-20 Series)
Versa Slide (SL-25 Series)
Versa Slide (SL-30 Series)
Versa Slide (SL-40 Series)
Versa Slide (SL-50 Series)
Versa Slide (SL-60 Series)
Uni-Slide
Versa-Lifter

Slide Faces

Versa Slide Face (SL-25 Series)
Versa Slide Face (SL-30 Series)
Versa Slide Face (SL-40 Series)

Mold Componenets

 • Round Cavity Blanks
 • Runner Sucker Pins
 • Core/ Sucker Pin Retainers
 • Core Pin Retainers
 • Rectangular Cavity Blocks
 • Straight Side Locks
 • Insulator Boards

Rectngular Pocket Molds

 • 7 7/8 x 7 7/8
 • 7 7/8 x 11 7/8
 • 9 7/8 x 11 7/8
 • 13 3/8 x 15
 • 11 7/8 x 18
 • 14 7/8 x 20

Round Cavity Molds

 • Two Plate Molds
 • Three Plate Molds
         X Series
 • 2 Plate/ Stripper Plate Molds
 • 3 Plate/ Stripper Plate Molds

Hot Runner

 • Hot Sprue Bushings
 • Hot Runner (Direct Feed)
 • Single Zone Controller
 • Hot Runner Interface

Contact OMNI Mold

 

 

 | Home | Ask OMNI | Slide Assemblies | Molds | Rectangular Pocket Molds | Round Cavity Molds |
 | Cam Action Molds | Hot Runner | About OMNI | FAQ's | Contact | Site Map |

 
Site Design and Maintainance By GLH LLC © 2002