Back to OMNI Mold Home






 • Round Cavity Blanks
 • Runner Sucker Pins
 
Core/ Sucker Pin Retainers
 
Core Pin Retainers
 • Straight Side Locks
 • Insulator Boards





 


All OMNI Mold Systems products are proudly made in the U.S.A.

 

 Mold Components


Side Locks

Mold Side Locks

• Side Locks ensure positive alignment between the top and bottom halves of the mold when the utmost in accuracy is required.

• Dissimilar steel materials, hardness and coatings prevent galling and binding due to thermal expansion.

• Each part number below includes a matched set of side locks and (4) SHCS for installation.

• OMNI will also machine any of our standard rectangular pocket molds to accept OMNI side locks.


 


Male: 8620 Case Hardened 58-60 Rc
Amoly Coating- 70-72 Rc
Female: A2 hardened to 58-60 Rc
Titanium Nitride Coating - 82-85 Rc

Part #
A
B
C
D
E
F
G
H
J
K
L
M
SHCS
Price
2/09
SLC-10
.875
1.125
2.000
1.250
.490
.51
.5000
.5002
.66
.187
.375
.250
8-32 X 5/8"
$135
SLC-20
.875
1.375
2.250
2.000
.500
.51
.7500
.7502
.66
.187
.688
.312
10-32 X 5/8"
$138
SLC-30
.875
1.875
2.750
3.000
.750
.98
1.2500
1.2502
1.13
.250
1.125
.375
1/4-20 X 7/8"
$192

 

 | Home | Ask OMNI | Slide Assemblies | Mold Components | Rectangular Pocket Molds | Round Cavity Molds |
 | Cam Action Molds | Hot Runner | Versa Lifter | About OMNI | FAQ's | Contact | Site Map |

Site Design and Maintenance By GLH LLC © 2002